|
|
|
|
|
|
|
|
|
Drywall Services in Sussex and the South East
Standard Partitions
- Knauf Standard Partitions utilising C-Stud or I-Stud, may be specified with confidence for non-loadbearing partitions and use fast drywall construction techniques.
- For both commercial and domestic partitions.
- Versatile systems to meet nearly every performance requirement.
- Minimum amount of components.
High Performance Twin Frame
- Knauf Twin Frame non-loadbearing partitions provide exceptional sound reduction properties using fast drywall construction techniques.
- Mainly used in the commercial sector (e.g. cinemas, auditoria and separating walls in apartments).
- For very high sound reduction values
- For very high fire resistance values.
Roomform & Roomform Quiet
Knauf Roomform and Knauf Roomform Quiet are non-loadbearing partitions and use fast drywall construction techniques.
- Specifically designed for internal partitioning in domestic situations.
- Very fast installation
- High sound reduction values
- Good impact resistance
- Minimum amount of components
- Creates strong and robust partition.
Separating Wall
- Knauf Separating Wall is a non-loadbearing partition using fast drywall construction techniques.
- Mainly specified for either separating one dwelling from another or separating a dwelling from a communal hallway or corridor, due to its high sound performance.
- Specifically designed to separate one dwelling from another
- High sound reduction values
- High fire resistance values.
Metal Furring
- Knauf Metal Furring can be used for most masonry backgrounds depending on the condition.
- Where the background is uneven and not suitable for Knauf Direct Bonding
- Where foil backed boards are used for the lining
- Where insulation is not required within the wall lining void
- Where only small service runs are required to be accommodated within the lining void
- For a stand-off of 20 - 35mm.
Wall Liner/Gypliner system
- Knauf Wall Liner may be specified with confidence for application to most masonry backgrounds depending on the condition.
- Where a variable stand-off clearance is required between lining and background of between 16 and 125mm.
- Where background is out of true
- Where insulation is required within the wall lining void
- Where deep service runs are required to be accommodated within the lining void.
Independent 'I' Stud
Knauf Independent "I" Stud may be used where the background is not suitable to receive other types of lining.
- Where the wall lining is required to be completely independent of an adjacent wall structure.
- For measured fire resistance.
- Where insulation is required within the wall lining void.
- Where substantial service runs and ducts are required to be accommodated within the lining void.
This system can accommodate any of the range of Knauf Plasterboards, depending on the performance required. The boards are fixed onto a lightweight metal framework of Knauf "I" Studs and Knauf "U" Channels.
Vertical service runs are easily accommodated within the metal framework.
Jumbo Stud Partitioning
Commercial partitions:
Using either a single or twin frame system, Lafarge partitions and separating walls are quick to erect, with very high levels of fire and acoustic performance. A variety of different specification options achieve acoustic insulation standards up to 65dB and fire resistance up to 180 minutes. Lafarge partitions use timber studs or Lafarge Cormet metal studs between 50mm and 146mm wide.
Components are light and easy to handle and quick and simple to install with the minimum of wastage. Lafarge Cormet partitions are dimensionally accurate and will not bow, warp or shrink. Standard cut-outs in both studs and tracks accommodate mechanical and electrical services without the need for site-formed holes.
|
For more information please visit the following:
LAFARGE - www.lafargeplasterboard.co.uk
British Gypsum - www.british-gypsum.bpb.com
KNAUF - www.knauf.co.uk
|
Bluefin Construction Ltd is C.S.C.S Certified
|
|
|
|
|
|
